Description
Feast Watson SANDING SEALER levels rough surfaces to create flawless, mirror finish coatings.
SANDING SEALER is a clear and quickly dries to a hard film which fills open grain and marked timbers.
SANDING SEALER can be dry sanded to create a super smooth finish with no grain pattern.
Top-coat SANDING SEALER with Feast Watson CLEAR VARNISH

Colour
Dries to colourless clear, although it appears milky in the can.

Application Guide
Surface Preparation
New Timber
Sand timber and remove all sanding dust before coating.
Previously Coated Timber
Previously coated surfaces need to be sanded to bare timber.
Remove all sanding dust before coating.

Application Procedure And Equipment
Apply SANDING SEALER using a brush, roller or spray gun.
If applying by spray, add 20% of mineral turpentine to thin product.
Allow to dry before sanding off all surface material with medium grade sand paper.
Apply 1-2 coats of SANDING SEALER depending on grain depth. Two or more coats may be required when applying by spray.
Thoroughly remove all dust from the surface prior to applying finish coats.

STAINING
Apply Feast Watson PROOFTINT stain after the final SANDING SEALER coat has been sanded, and prior to the application of top coats.