DMS-1 The King's 4th Pitbull build

[king casey]

So to get some perspective regards to scale length...
Seems to be correct with the bridge over the pre-drilled holes.
Strange


cheers, Mark.

[OliSam]

So to get some perspective regards to scale length...
Seems to be correct with the bridge over the pre-drilled holes.
Strange


cheers, Mark.

That was the same for me,Mark.
However once intonated the lowE&A were screwed tightly back.
I reckon 2mm back would be the right thing to do.


Sent from my iPhone using Tapatalk

[king casey]

That was the same for me,Mark.
However once intonated the lowE&A were screwed tightly back.
I reckon 2mm back would be the right thing to do.

That's interesting then Oli.

So now that you have 'correct' strings on...what is the actual scale distance of your high 'E'?

cheers, Mark.

[OliSam]

That's interesting then Oli.

So now that you have 'correct' strings on...what is the actual scale distance of your high 'E'?

cheers, Mark.

Here are my high and low E’s mate.


Sent from my iPhone using Tapatalk

[king casey]

Thanks Oli. So that looks like 611.5mm to me. So a tad over the 24".

cheers, Mark.

[OliSam]

Thanks Oli. So that looks like 611.5mm to me. So a tad over the 24".

cheers, Mark.

Youre very welcome.
I took the measurement as 613.5mm but i think that if you just move the bridge 2mm back you wont get the spring squash or the saddle screw pressing against the string as the saddle is drawn backward for intonation.


Sent from my iPhone using Tapatalk