Frankie, you should have stuffed some padding under one shoulder of her jumper before you took the photo.
You could have used it as proof that Igor exists!
Making the world a better place; one guitar at a time...
So some more carving and a neck pocket eventuated.
The observant ones will note the tell tale signs of CA glue wicked into cracks on the top horn. I suspect that these began when the router threw it, and subsequent carving released some stresses in the timber.
I couldn’t help but fit my original neck experiment up to see how it looked, I’m going to have to replicate it for this body, I really like the reverse headstock look for this.
Sent from my iPad using Tapatalk Pro
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Look at that badass bevel!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1