Can I get some suggestions on what is best for finishing a maple fretboard.
Has anyone ever used White Knight spray acrylic?
Thanks
Can I get some suggestions on what is best for finishing a maple fretboard.
Has anyone ever used White Knight spray acrylic?
Thanks
Co-incidentally using it on my current refinish on the Squier Bronco.
I will definitely be leaving it to dry for a couple of weeks.
The body is undergoing a new paint job and will probably also get a White Night clear gloss.
Pickguard material will probably take forever to show up so there is no urgency.
cheers, Mark.
Thanks for the info Mark.
Can I ask how many coats on the feet board are you doing?
Hi Colin no worries. I've done about 4-5 coats with a light sanding with 400 grit in between.
To knock off the orange peel and bury the decal edges.
Not shown in the picture is that I have removed the frets.
I appear to have gained an obsession with 7.25" radius necks.
This is the 4th one in production at the moment with 2 completed.
cheers, Mark.
Build #1 - TLA-1Q
Build #2 - Scratch Thinline Tele
Build #3 - Scratch Rickenbacker 330/12
Build #4 - Scratch All Aussie Timber Strat
Build #5 - 1st Violin/Fiddle
Pedal Build #1 - Aion Gale
Pedal Build #2 - Aion Aurora
I'm in Sydney.
Build #1 - TLA-1Q
Build #2 - Scratch Thinline Tele
Build #3 - Scratch Rickenbacker 330/12
Build #4 - Scratch All Aussie Timber Strat
Build #5 - 1st Violin/Fiddle
Pedal Build #1 - Aion Gale
Pedal Build #2 - Aion Aurora
Build #1 - TLA-1Q
Build #2 - Scratch Thinline Tele
Build #3 - Scratch Rickenbacker 330/12
Build #4 - Scratch All Aussie Timber Strat
Build #5 - 1st Violin/Fiddle
Pedal Build #1 - Aion Gale
Pedal Build #2 - Aion Aurora