Results 1 to 10 of 26

Thread: GS-2Z build - first one in a looooooong time

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #17
    Overlord of Music McCreed's Avatar
    Join Date
    Oct 2018
    Location
    AUS
    Posts
    3,552
    Wipe-on polyurethane will probably be your best option as it doesn't yellow with age. However, given the apartment aspect, poly may be a bit smelly. I usually advocate for mixing up DIY wipe-on (50/50 mineral turps/poly) but even with low-odour turps, it may be a bit much in an apartment.

    FWIW, Tru Oil isn't too odoriferous and not as hard on the nose as poly IMO, but furthermore, I don't find the slight amber hue objectionable even after some time.

    Somewhere on the forum someone (can't recall who) posted pics if Tru Oil finished guitars new & old, and the difference was less remarkable than I expected. I'll see if I can find it, but initial searches were bust.

    Anyway, below is one of my alder strats (non-PBG) that is shown with a Tru Oil only finish done in 2017. The photo was shot in 2019. Very little difference after two years.

    OK, I've edited to add the original 2017 photo. Different angle, different lighting etc, but I can attest that IRL, there's only a hint of colour difference.

    Click image for larger version. 

Name:	2017 strat full 2_rezd.jpg 
Views:	228 
Size:	215.5 KB 
ID:	34692 Click image for larger version. 

Name:	2 year Tru Oil_rezd.jpg 
Views:	246 
Size:	666.4 KB 
ID:	34691
    Last edited by McCreed; 25-04-2020 at 11:21 AM.
    Making the world a better place; one guitar at a time...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •