Quote Originally Posted by Simon Barden View Post
You haven't wired it exactly as per your wiring diagram have you? Those tone pots are slightly different as the other end of the track isn't grounded (not that it really matters).

But I would definitely have put some heat shrink over the selector switch connections. So easy for one of those to short to ground or permanently make.
Good spot Simon. Most of the schematic is based off Rick's current schematics but I made some changes based on what I'd seen around. The other change is the push pull pot to incorporate the extra cap.

I'll give some thought to the heatshrink or other methods to make sure there is no accidently grounding.

Sent from my SM-G960F using Tapatalk