Fair enough. I did think of the 9mm pots when i saw those 16 mm ones but I still wasn't sure of the clearance with the jacks positioned there when the jack is in place.
Fair enough. I did think of the 9mm pots when i saw those 16 mm ones but I still wasn't sure of the clearance with the jacks positioned there when the jack is in place.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
The photos don't really show, but there is plenty of clearance vertically between the 6.5mm jacks and the pots. 125B enclosures have a lot of height. The only clearance issue is between the pots and the switches. My SPST switches arrived today so I will test this evening. Hopefully I will have enough space that I don't have to junk the enclosure.Originally Posted by Andy40
And I will make an updated copy of the template for next time.
Reply With Quote
