The new item on the agenda.

[McCreed]

Presuming you haven't sorted this out on your own already, based on the leadout for humbuckers (and looking at the Entwistle website) you're on the right track there. The ASN-57's are just a vertically stacked humbucker instead of side by side.

Red/White soldered together, Green & Bare both go to ground and Black is the positive (go to switch).
Entwistle has copied the Seymour Duncan colour codes which helps too.

[ozzbike]

Presuming you haven't sorted this out on your own already, based on the leadout for humbuckers (and looking at the Entwistle website) you're on the right track there. The ASN-57's are just a vertically stacked humbucker instead of side by side.

Red/White soldered together, Green & Bare both go to ground and Black is the positive (go to switch).
Entwistle has copied the Seymour Duncan colour codes which helps too.

Hold the phone here....a vertically stacked Humbucker......so I could fit more push pulls and split to get more sounds?

But would the coils underneath have enough oomph to pickup the strings?

I think that their purpose is to reduce the noise....and maybe I should just wire them for that purpose.

Thank you for the ideas.....