Looks like it will work. You probably knew that but I always post mine to see what grave errors I have made.
Curious why you want the phase switching?
The only piece of advice I have is to try it and see if you like it before putting it in. This wiring harness is a bear to install. I tested both of mine first and inn both cases testing resulted in using different caps than I thought I would use. In both cases have also wondered if I should have done a little more testing.
The first has a weird Dano harness...and I am wondering about the pot values. In the case of the recent one, I might have tried treble bleeds...
If these harnesses were on a Jazz bass I might open it up and experiment a little more. On an ES my unhappiness would need to bend toward clinical depression to mess with in now that it's installed and working. I actually ended up soldering a ground wire that had come loose through the F-holes rather than take it out again. My fingers hurt from weird positions I put them in. I kept hoping that my mom was wrong and that my face would not stay that way.
Reply With Quote