Skye's TB-4 (First build)

[McCreed]

I don't know what your finishing plan is, but if you're spraying anything, be sure to go with lots of very light coats around the Elfin horn carving bit.

Those kind of grooves & recesses are good traps for the finish material and could easily pool or run.

[Skye]

Hey thanks every one, still just carving at the moment

I don't know what your finishing plan is, but if you're spraying anything, be sure to go with lots of very light coats around the Elfin horn carving bit.

Those kind of grooves & recesses are good traps for the finish material and could easily pool or run.

Yeah I'll probably go with a stain and then use an ink wash to give it some depth