Mosrite MKA-2

[Mosrite Slab]

Double check the soldering of the ground wire between the volume and tone pots, especially the volume pot end. They may cause you problems later.

The one close to the edge? Will do, thanks for the heads up.


Sent from my iPhone using Tapatalk

[Mosrite Slab]

The one close to the edge? Will do, thanks for the heads up.


Sent from my iPhone using Tapatalk

Nearly done. Yesterday was a disaster, it sounded terrible, fret buzz everywhere and horrible muddy sound. So today I replaced the strings with regular gauge ones, temporary shimmed the nut, lowered the bridge and raised the bridge pickup poles.

Today I’m happy, my amp isn’t great Peavey Blazer 158 but after whacking it up a bit I can tell the power is there.

Time for it so settle and then I’ll do a fret check and get the intonation done. After that a final polish to the body and maybe a few more coats of oil to the neck as it’s a bit dull and sticky.




Sent from my iPhone using Tapatalk