Quote Originally Posted by WeirdBits View Post
If the bridge pickup is too quiet (compared to the neck) then it's likely to be a bad solder point somewhere in the bridge side of the circuit, or a mix up in the connections. Are both coils working on the Bridge pup when the Bridge volume push/pull is 'down', ie, when it's not split?

Photos of your wiring would help, as it's usually easier to 'see' what/if something is wrong.

I just found the issue. A couple stray wires in the tone circuit touching the wrong connector.
I'm pretty new to wiring, and it's a messy job. If it fails down the road, I'll rewire the whole thing to look nicer.

Thanks!