The Tru-oil has arrived and I'm working on the neck.
Early on in the build a cheap G clamp made an indent in the fretboard, here are pics of the repair I carried out using some rosewood sawdust and superglue. I'm pleased with the repair but lessons learned for next time are to cut the piece of scrap with a much finer toothed saw blade and to get some thinner glue with a small dropper. I couldn't believe how hard superglue sets and I was seriously worried I might carve a piece of the fretboard out while cutting down flush, either that or some of my finger if it slipped.
Last edited by Mosrite Slab; 11-06-2019 at 03:39 AM.
Reply With Quote
