Results 1 to 10 of 79

Thread: Mosrite MKA-2

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Overlord of Music Sonic Mountain's Avatar
    Join Date
    Jul 2017
    Location
    Toowoomba, Qld.
    Posts
    3,261
    Looks tasty. Sink back is very hard to avoid, if you look closely at some commercial finishes you can see it there as well, especially on guitars a few years old. The longer you can resist cutting it back, the more likely you'll be able to polish that area flat.
    Build 1 - Shoegazer MK1 JMA-1
    Build 2 - The Relliecaster TL-1
    Build 3 - The Black Cherry SG AG-1
    Build 4 - The Sonicaster TL-1ish
    Build 5 - The Steampunker Bass YB-4
    Build 6 - The Howling Gowing ST-1

    "What I lack in talent I make up for with enthusiasm"

  2. Liked by: Mosrite Slab

  3. #2
    Quote Originally Posted by Sonic Mountain View Post
    Looks tasty. Sink back is very hard to avoid, if you look closely at some commercial finishes you can see it there as well, especially on guitars a few years old. The longer you can resist cutting it back, the more likely you'll be able to polish that area flat.
    Thanks for that, it’s been so long I’m happy to wait. I’d rather do that than have to go through a patch process.


    Sent from my iPhone using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •