#6 - sta-1ht

[fender3x]

You should be happy. It's a beaut!

I am curious how you made the hole in your hands free stand. I may want to try to replicate that!

[Rossc0]

You should be happy. It's a beaut!

I am curious how you made the hole in your hands free stand. I may want to try to replicate that!

Thanks, the post attached to the guitar is 30mm, so I used a 32 mm spade bit to drill out a circle then drew round a spare piece of the 30mm post at the angles I wanted and knocked out the corners with a sharp chisel.