My first PBG TLA-1 build

[I’ll give it a go]

I'm probably not the best person to reply.
I will say however, to get the best possible result, you need to have the base flat as you can.
Good thing with the undercoat is that it shows up all the blemishes. I don't think exposed wood would be a problem.
I'd probably keep sanding it. What grit are you down to?
I read that 320 is good if you are going to paint.

BTW out of curiosity, what is the final colour going to be?

cheers, Mark.

I’ve been using 240, 400, 800 then finish with 1200.

Colour wise I’ve changed my mind so many times but I’m going to stick with what I originally wanted to do which was Surf Green.


Sent from my iPhone using Tapatalk

[king casey]

I’ve been using 240, 400, 800 then finish with 1200.

Unless somebody comes along and contradicts... I'd have thought the 1200 would be after you have applied the clear coats on top.

cheers, Mark.

[I’ll give it a go]

Unless somebody comes along and contradicts... I'd have thought the 1200 would be after you have applied the clear coats on top.

cheers, Mark.

Ok thanks Mark, Everyday a learning day. Loving it, thanks.


Sent from my iPhone using Tapatalk