JM-1 By Nitroburner1000

[king casey]

i should of set the bridge on a slight angle.

Doh!! I did exactly the same with my JM-1.
Fortunately for me it became evident whilst still in pre-finish state.
I had to re-dowel and then re-drill.



I'd be interested to see if there is a suitable replacement for these bridges.

cheers, Mark.

[nitroburner1000]

Doh!! I did exactly the same with my JM-1.
Fortunately for me it became evident whilst still in pre-finish state.
I had to re-dowel and then re-drill.



I'd be interested to see if there is a suitable replacement for these bridges.

cheers, Mark.

Me too, a wider bridge or one with adjustments backwards or forwards.