JM-1 By Nitroburner1000

[nitroburner1000]

Hi to all. Havnt been on for yonks, no work on my tele yet, will get round to it now winters coming.
A HUGE QUESTION. Im doing a bit of maintainance on my JM 1 and having a problem. The intonation is a little off at the low e string, i think its because i should of set the bridge on a slight angle. Bit late now!
So i could remove the neck, fill the screw holes and replace with it just away from the body, the scratch plate would cover it, but i was wondering if the other option could be if i replace the bridge with one with more adjustments? And have you seem one i could use. Any thoughts out there guys?
Ta in advance.

[king casey]

i should of set the bridge on a slight angle.

Doh!! I did exactly the same with my JM-1.
Fortunately for me it became evident whilst still in pre-finish state.
I had to re-dowel and then re-drill.



I'd be interested to see if there is a suitable replacement for these bridges.

cheers, Mark.

[nitroburner1000]

Doh!! I did exactly the same with my JM-1.
Fortunately for me it became evident whilst still in pre-finish state.
I had to re-dowel and then re-drill.



I'd be interested to see if there is a suitable replacement for these bridges.

cheers, Mark.

Me too, a wider bridge or one with adjustments backwards or forwards.