That is going to get awful tight in the control cavity, beware stray earths!Originally Posted by MrSixxxty6
Alright, the back and sides are tung oiled and polished.
I sanded the back of the neck up to 1200 with tung oil.
It feels gorgeous. I should add, the neck was a thick C shape and I sanded it down to more of a D shape. that's just what I prefer.
Unfortunately the head stock came out quite a lot darker then the body... Don't think there's much I can do about it..
Anyway, it's electronics time! If
I drilled two hole on the control plate for a couple of On-On switches so I can split the Alumnitones.
It's going to be a tight fit back there. I'm going to have to be careful where i solder my wires.
Just waiting on my 3-way switch and copper tape from Pitbull.
Reply With Quote