Alright, the back and sides are tung oiled and polished.


I sanded the back of the neck up to 1200 with tung oil.

It feels gorgeous. I should add, the neck was a thick C shape and I sanded it down to more of a D shape. that's just what I prefer.

Unfortunately the head stock came out quite a lot darker then the body... Don't think there's much I can do about it..


Anyway, it's electronics time!
I drilled two hole on the control plate for a couple of On-On switches so I can split the Alumnitones.




It's going to be a tight fit back there. I'm going to have to be careful where i solder my wires.
Just waiting on my 3-way switch and copper tape from Pitbull.