Hey BearClaw, no such thing as a dumb question, we were all first timers once.

Have you had a look at this? It only shows the wires and solder points you need to worry about.

https://www.pitbullguitars.com/wp-co...pot%202017.pdf

Generally the 'bare' wires are all earths and the others are signal from the pickups. So you just need to track your signal path to the output jack and make sure every thing that needs to be earthed is. Most wiring can be done a number of different ways, but the PDf should be the most common.

If you get stuck, pics are helpful and our resident electricky guru is Weirdbits if you are completely lost.