Definately!
Definately!
Stop it you lot
Getting itchy Dave?
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
I think Igor may have escaped and planted bad thoughts in my headOriginally Posted by FrankenWashie
Apparently Cabronita means bastrad in the local lingo ( them that "the wall" is meant to stop ).
I think if I did one it would be Fidelitrons rather than Filtertrons or TV Jones
Not possible Dave, I have that Cabron Igor on lock down (bloody Adam and his bloody mahogany kit specials). He’s not allowed to leave the lab as he’s got some wiring to do.
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Ah Ha! I knew you had been got. just had that feeling
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
No, I managed to distract Igor by tagging my finger with a grinder mounted flap disc.
I have, thankfully, avoided any more kit purchases, as I’m mindful of the fact there is a current build for a mate, the sanding and electrics prep for the silent build, an LP to finish, and a Vee sitting untouched in its box. Not to mention some building projects for the Bride, a workbench to finish up and a sanding station to build. (I don’t even want to think about the scratch builds, the lumber that needs sizing rebuilding my timber rack or the custom fretboard work 🤫
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
I should not have looked at this thread!
First (proper) build: http://www.buildyourownguitar.com.au...ead.php?t=8546
Second build: http://www.buildyourownguitar.com.au...ad.php?t=10229
Yep that's a tall order of things to do!No, I managed to distract Igor by tagging my finger with a grinder mounted flap disc.
I have, thankfully, avoided any more kit purchases, as I’m mindful of the fact there is a current build for a mate, the sanding and electrics prep for the silent build, an LP to finish, and a Vee sitting untouched in its box. Not to mention some building projects for the Bride, a workbench to finish up and a sanding station to build. (I don’t even want to think about the scratch builds, the lumber that needs sizing rebuilding my timber rack or the custom fretboard work 🤫
BTW you need fingers to play guitar
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
yeah don’t I know it!Yep that's a tall order of things to do!
BTW you need fingers to play guitar
It’s all good, Igor has spares. Luckily it was a small hit and no major damage.
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Posting Permissions
Reply With Quote