Quote Originally Posted by FrankenWashie View Post
I can see what you are saying, the top two tuner holes are different distances from the edges. The mids look right as do the ones closest to the nut but the top two are definitely out.
That’s a definite dowel and redrill job unless you want to flick it back to Adam, or forget about it if you can put up with it.
Personally speaking, even the photo of it is giving me a tic, so I’d be cutting the plug for it as we speak. 😵😂
To be honest, it took me a while to notice it, and that was after I removed the machineheads. Plus I'm not confident enough to re-drill the headstock (I can already imagine a potentially catastrophic mess !) so...I'll keep it like that and work on a couple of other things instead. Thanks for your advice anyway