AG-2 first kit build

[Andyxlh]

Btw, before gluing the neck make sure then neck centre line runs through the centre of the bridge post holes

[Richy17]

Btw, before gluing the neck make sure then neck centre line runs through the centre of the bridge post holes

Wholeheartedly recommend this

[wazkelly]

Btw, before gluing the neck make sure then neck centre line runs through the centre of the bridge post holes

Looks like a bolt-on neck but still a relevant point to check how things line up before you get too far advanced, just in case modes are required.

The bevel work looks great.

Cheers, Waz