Quote Originally Posted by kuanjb View Post
Awesome! I shall be watching as I also have a resonator kit waiting to be built.

I'm curious how you'll do the piezo pickup. In my kit it came with an under saddle rod pickup but that will cover the central screw for adjusting the cone. Plus the under saddle will require drilling through the cone to route the wires. I'm leaning towards using a disc piezo under the cone myself.

Pot values and whether you use a preamp or stereo out are also a couple things to consider.

Good luck with the build!

Sent from my LG-H930 using Tapatalk
Hi kuanjb,
Once you've got that cone tightened up to the spider, you shouldn't need to touch it.
As far as the wiring for the kit one goes, I ran the wiring across the spider leg closest to the control cavity and popped a 3mm hole into the very corner of the ledge the cone sits on to feed that little jack through.
Currently routing and filing out new holes in the body sides to house a fishman pre-amp and a battery case.