Hey guy finally got back to doing my guitars currently i'm on a hollow body i posted just doing the final set up and she be done i also got a SG from PB this week and an epiphone i picked up from Cash converters for $150, its a g400 body was pretty knocked around so luckily it all sanded out and i'm going to reclear it with some 2k as lacquer wont stick to the original 2k be interesting to see how it comes up, i dont have any SGs in my collection the SG from Adam is Mahogany not sure the model here some pic's

here is the Epiphone G400

Click image for larger version. 

Name:	esg2.jpg 
Views:	283 
Size:	545.6 KB 
ID:	28809

Click image for larger version. 

Name:	esg1.jpg 
Views:	263 
Size:	556.3 KB 
ID:	28810

Click image for larger version. 

Name:	esg3.jpg 
Views:	264 
Size:	533.1 KB 
ID:	28811

ok here's the PB SG
i have used Rit scarlet and done 3 coats of dye 2 I damp sponged off than left the last coat to get to the cherry i wanted, i have just got its 1st protective clear coats (3) used SCA rattle cans i always do protective coats over dye or stain, shes going to have Gibson 59 classic pups in it as i have had them for a few years and haven't used i'm tossing up if ill just leave it cherry or pop on a burst not sure yet SGs dont really look that good in anything than cherry or black, when this lot is done i'm going to start the PRS-1H & JM-1 i got a month ago from Adam i got a couple of finishes i want to try on them so stay tuned

Click image for larger version. 

Name:	sg1.jpg 
Views:	283 
Size:	511.5 KB 
ID:	28812

Click image for larger version. 

Name:	g3.jpg 
Views:	271 
Size:	496.1 KB 
ID:	28813