I’m really enjoying watching this. Keep the pics coming.
I’m really enjoying watching this. Keep the pics coming.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Thanks sonic
Lookin' great Adam
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
a bit of shaping with the bastard file
Last edited by Adam Barnes; 20-10-2018 at 05:02 PM.
That's looking real nice so far
trussrod grooved out
neck roughly cut out
fretboard shaped, question for anyone who has done this before, most videos show radiusing and fretting before gluing to the neck. Can i glue the fretboard on before and radiusing and fretting in place
B&G definitely glue their fret board to the neck before radius-ing and fretting. They have some unreal videos on facebook which give some insight into how they do things. They have a jig which holds the neck straight against a linisher and then it's swung in an arc to get the right radius on it. I'll see if I can find a you tube link.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
HI Adam, On the three necks i have made so far and one reboard, I have slotted the board, and mounted it before adding a radius and fretting. It shouldn't create a great issue doing it that way, just have to be sure you are bang on centering it as you glue and clamp it.Originally Posted by Adam Barnes
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Posting Permissions
Reply With Quote