Results 1 to 10 of 46

Thread: Reviews of Upgrades and Modifications

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    All good comments Fender 3 and agree that anything going into a semi hollow body needs to be the best quality you can afford as it is such a pain getting everything in there and for it to work properly in the first place. Trouble shooting afterwards will most likely require removal of the entire wiring loom. Not sure my patience would be up for that.
    On the one & only semi hollow build it took about 6 attempts to get everything installed and working properly.

    Sent from my SM-A520F using Tapatalk
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  2. #2
    Moderator fender3x's Avatar
    Join Date
    Jan 2016
    Location
    Miami, FL, USA
    Posts
    2,713
    Quote Originally Posted by wazkelly View Post
    On the one & only semi hollow build it took about 6 attempts to get everything installed and working properly.
    When I finally finished mine, I broke a ground putting it in. I ended up re-soldering the connection through the f-hole because I could not bear to take it all out and put it all back again.


    Sent from my ONEPLUS A3000 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •