Witto's 2nd build.. The Mossie is here !

[Mosrite Slab]

I see you've dowelled and re-sited the bridge posts, presumable as they were slightly out of line with the roller bridge ? I wasn't going to bother but with the anniversary of Johnny's death last Saturday lots of photos kept appearing on social media. It was only then I noticed that the stop on his white guitar is a lot further back, past the lead jack socket. I've decided to put mine there too and also take the opportunity to check the bridge posts now I've screwed the neck on as it appears to be about 1mm out of square when measured from the last fret. They're also a little bit loose.

[wcieslik]

I see you've dowelled and re-sited the bridge posts, presumable as they were slightly out of line with the roller bridge ? I wasn't going to bother but with the anniversary of Johnny's death last Saturday lots of photos kept appearing on social media. It was only then I noticed that the stop on his white guitar is a lot further back, past the lead jack socket. I've decided to put mine there too and also take the opportunity to check the bridge posts now I've screwed the neck on as it appears to be about 1mm out of square when measured from the last fret. They're also a little bit loose.

Yes. I had to dowel the bridge posts too. They were really loose. Too loose to use as they were. Have decided to go without a trem. But am changing the pickups to 2 x humbuckers. So making a new scratch plate to suit. Also had to dowel a hole I put through the back... Oops. Long funny story.

Sent from my D6653 using Tapatalk