RD-4 build. An ode to doom metal.

[Sonic Mountain]

Cool as. The bodies are almost always multiple pieces, but it looks like you have a pretty good grain match. Once stained and assembled it can be hard to notice. Also dents will come out with a bit of steam - a clean rag and an iron will do the trick most of the time.

[Matt Pike's Shirt]

Cool as. The bodies are almost always multiple pieces, but it looks like you have a pretty good grain match. Once stained and assembled it can be hard to notice. Also dents will come out with a bit of steam - a clean rag and an iron will do the trick most of the time.

Thanks. One is a chunk missing so that trick might not work. The other might be a dent of sorts, so that would work.

Still might stain anyway, there’s enough going on that it might be hidden. The bottom curve has a pretty obvious cap though, that’s what I’m worried about.


Sent from my iPhone using Tapatalk