FrankenWashie’s Korean Deluxe ST

[Marcel]

Jack plate was my first thought too, plug goes in and shorts the hot arm/tip onto the shielding. Or, if your control cavity is a fraction shallow then switch lugs and/or its solder blobs could brush the shielding on the bottom once the scratchplate is screwed down tight.

My sentiments exactly.... If you feel you have wired it right then these are the first two places to look as they are the two most common 'drama spots'...

[FrankenWashie]

My sentiments exactly.... If you feel you have wired it right then these are the first two places to look as they are the two most common 'drama spots'...

Will do that tonight if i get a chance. I was quote surprised by the state of the pot wiring. It honest looked as if the pots had been recycled from something else.