HBB-5 semi-hollow bass stock pickups

[ChefBrianNYC]

Neck pu is bottomed out...i will try raising the bridge!!! Thank you!

[wazkelly]

Neck pu is bottomed out...i will try raising the bridge!!! Thank you!

Looking at kit photos on PBG site the routs are similar to those on my EX-5 and suggest removing bridge PUP and cut out some super high density foam that is no thicker than 5 mm to fit the hole and use that instead of springs for height adjustment. For neck PUP, maybe check to see if springs are doing anything at all. If not, remove them and replace with an even thinner piece of foam and screw things down solid.