FrankenWashie's Fourth, The TLA-TH

[FrankenWashie]

bummer Franky, how many clear coats did you apply ?

5 was the final count, but all done in the very thin DT method. Probably should have built up a few more.

[FrankenWashie]

Bugger!
How bad is the decal? If it's only a small bit that's been hacked then I can probably find some black decals that you can cut a patch out of and apply. Then you can just clear coat that bit again?

Thanks for the offer Bill, I’ve got spares it’s more the annoyance of having burned through it than anything else. We shall redecal and go again.

[FrankenWashie]

If I keep this pace up I may have everything finished by 2021!

All electrically good, will need to remake the covers as I’m not happy with them, the adjuster holes for the pups are out about 1/8”/3mm and I need some black screws for the main cover and for the neck attachment. The ones that cam with the Cosmo black plate are 4mm, the kit actually uses 5mm.

I’ll get the machine heads into it and then see how it takes to some strings.


Sent from my iPad using Tapatalk Pro

[Simon Barden]

You'll probably finish it way before I get any of my builds finished!

Keep going, Frankie!

[Andyxlh]

The Artist Bullbuckers are supposed to be SD clones and come with chrome covers for $40. Checkout the demo here... https://www.artistguitars.com.au/buy...bridge-c/12935

I have a bullbucker in my Frankenstein. I like it a lot.

[Dedman]

you have my solder station

[FrankenWashie]

No I’m pretty sure that one is mine..

[Dedman]

* eyes Igor suspiciously

[FrankenWashie]

* eyes Igor suspiciously

Igor doesn’t filch tools....just parts...

[wazkelly]

Mainly into body parts or necks too?