Now to put the neck in the correct position. Looking at my other guitars, its easy to see where the string meets the bridge. On these the high E string is exactly equidistant from the crown of 12th to the nut and the bridge.
But where on a Floyd Rose (type) bridge, where is the point to measure to so as to ensure the neck is in the correct position?
If it is the front of the channel where the string will lay, then the neck has to be up against the pick-up to be equidistant.
For my measurements, I have the high E string bridge mount at its further-est forward position toward the nut. Nut to crown of 12th is 12.75 inches or about 324mm.
Last edited by Buchanfarmer; 25-03-2018 at 06:46 AM.
Reply With Quote
