Not bad ! 😜Originally Posted by Sonic Mountain
I just used google translate. My real word French is limited to asking where the travel information centre is
________________
Should I put putty then sand or reverse?
Not bad ! 😜I just used google translate. My real word French is limited to asking where the travel information centre is
________________
Should I put putty then sand or reverse?
Last edited by Volgar; 14-01-2018 at 07:29 AM. Reason: adding signature
"Isn't funk the most beautiful creation of man?"
- Volgar, 2018
__________________________________________________ __________
#1st build - JMA-1L
#2nd build will certainly be a custom kit close to the GR-1SFG
You will need to sand the excess putty off - so sanding after putty will be needed.
I would do some sanding first to make sure all the shapes and curves of the guitar are correct. It's also helpful for finding any small imperfections that you may want to fix.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Posting Permissions
Reply With Quote