Results 1 to 10 of 35

Thread: New pedal board project for 2018.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Was just playing my Fender Strat through my Marshall amp with just my red Fuzz Face and my TS-9 (in that order) going into the Marshall set to it's clean channel, it's a bit of an old school way of doing distortion, but geez you can get some pretty cool tones out of it, you get lots of controllable feedback which you can control via the guitar's volume control, I found that there are a few sweet spot settings for the volume control, and you can also control the pitch of the feedback note just by manipulating the trem-bar.

  2. #2
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    Quote Originally Posted by DrNomis_44 View Post
    Was just playing my Fender Strat through my Marshall amp with just my red Fuzz Face and my TS-9 (in that order) going into the Marshall set to it's clean channel, it's a bit of an old school way of doing distortion, but geez you can get some pretty cool tones out of it, you get lots of controllable feedback which you can control via the guitar's volume control, I found that there are a few sweet spot settings for the volume control, and you can also control the pitch of the feedback note just by manipulating the trem-bar.
    Cool! I really need the upgrade the amp set up this year, I have persisted with small modeling amps, maybe it’s time to upgrade and get pedalling?
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •