And here we are again ready for the clear next week.
The neck and head is the same colour as the body I have primed the headstock on the front top and the sides. I will sand it down and then apply a totally black face sides head and back and blead it into the neck then at the shoulder spray it black and blead into the neck.
Hopefully that will work out it wont be until mid next week now before I have any more updates.
Hope ye all like it.
1: FV Circa 1975 Total build from scratch fret board the lot Design out of an Electronics mag. RIP
2: FS Candy Red on Gold Basecoat.
3:Finished Build: LP Custom 3 pickup Black Silver Burst.
4:Current Build SGM-1 Electric Guitar Kit (Mahogany) Going for a nice wood stain effect.
5:Current Build P Bass Electric Guitar Kit (Ash) Going for a nice wood stain effect.
6:Current Build ES-3 Electric Hollow Body Guitar Kit (Sunburst) Going for a nice wood stain effect.
Looks greatOriginally Posted by DaveC64
And here we are again ready for the clear next week.
The neck and head is the same colour as the body I have primed the headstock on the front top and the sides. I will sand it down and then apply a totally black face sides head and back and blead it into the neck then at the shoulder spray it black and blead into the neck.
Hopefully that will work out it wont be until mid next week now before I have any more updates.
Hope ye all like it.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Posting Permissions
Reply With Quote