Daves SG Build Whist Waiting for the clear to dry on my LP

[DaveC64]

Yey it worked marks be gone. I used U buet sanding sealer. I did take your advice on one mark and went with the direction of a bad mark and then when it was gone sanded with the grain again. I have applied one more coat of sealer rub down tomorrow and onto the dyes when they arrive strange how the sealer arrived first when I ordered it last. Karma The wood is now looking much better and the colour is a lot less noticeable now.

[wazkelly]

Yey it worked marks be gone. I used U buet sanding sealer. I did take your advice on one mark and went with the direction of a bad mark and then when it was gone sanded with the grain again. I have applied one more coat of sealer rub down tomorrow and onto the dyes when they arrive strange how the sealer arrived first when I ordered it last. Karma The wood is now looking much better and the colour is a lot less noticeable now.

Good to hear things are working out fine for you.

Sent from my SM-A520F using Tapatalk