Plainfaced's TL-51 Ash Nocaster build

[FrankenWashie]

If it’s an enamel, you’d want to steer towards another enamel clear, from what I’ve read an acrylic clear might screw your colour coat up. If you can, get a can of each, take some scrap wood and prep two pieces to the same standard as your body, paint them with way at ever you have left over, then test each to see if you get a reaction.

[DaveC64]

If it’s an enamel, you’d want to steer towards another enamel clear, from what I’ve read an acrylic clear might screw your colour coat up. If you can, get a can of each, take some scrap wood and prep two pieces to the same standard as your body, paint them with way at ever you have left over, then test each to see if you get a reaction.

Yep never mix enamel and acrylic.

Sent from my A101 using Tapatalk