Build #2 Non PitBull Rebuild - Vintage Brand Strat Copy

[phrozin]

mmm, patience. Suppose I can try. I do have the Tele sitting waiting can start sanding that while I wait I suppose.

you shouldn't need any more than 3 coats of hi fill if its taking that many coats your not sanding it enough or flat enough with the initial sand you should ALWAYS use a sanding block and if your going for a paint finish do not sand with the grain, use circular pattern your trying to paint a smooth flat surface staining is a different sand process its a pretty common mistake when doing a killer glass finish and you cant figure out why its wavy

[andrewdosborne]

you shouldn't need any more than 3 coats of hi fill if its taking that many coats your not sanding it enough or flat enough with the initial sand you should ALWAYS use a sanding block and if your going for a paint finish do not sand with the grain, use circular pattern your trying to paint a smooth flat surface staining is a different sand process its a pretty common mistake when doing a killer glass finish and you cant figure out why its wavy

Top tip phrozin I've discovered this through trial & error