bugger DK. Doubt you will need to sand through the clear. Make sure it's fully cured. Careful sanding and you should be able to remove the run.
bugger DK. Doubt you will need to sand through the clear. Make sure it's fully cured. Careful sanding and you should be able to remove the run.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yep, I'll give it a few days and then go back to the undercoat and bring it back up.Originally Posted by wokkaboy
As Murphy would dictate it's naturally in a most visible position on the top edge of what would be the top horn if it were a Strat or similar double cut.
Given that I have the new pups on the way for The Count I've taken the opportunity to pull the neck off it for a bit of TLC so have both it and the Tuff Dog neck to entertain me for a few days anyway so not wasted days.
I went over to my mates place yesterday for a coffee & BS session to review what we have recorded so far and came away with another 9 tracks to start laying down the backings for.
Posting Permissions
Reply With Quote