That headstock is rather cool
Sent from outta space using MartianTalk
That headstock is rather cool
Sent from outta space using MartianTalk
Tele Deluxe: http://www.buildyourownguitar.com.au...ht=tele+deluxe
Johnny Ramone:https://www.buildyourownguitar.com.a...=johnny+ramone
ES2V:https://www.buildyourownguitar.com.a...?t=7455&page=9
DMS-1 Mustang: https://www.buildyourownguitar.com.a...=10548&page=12
AG-1 Perhaps i am Tony Iommi: https://www.buildyourownguitar.com.a...t=11537&page=7
I was going to ask what stain you are using...it looks a little weak?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Hi everyone
Managed to get quite a lot done this week.
Masking the binding and the front to get the back stained
Here it is after the stain
I have decided to go with Tru oil and matte finish
Here it is after the initial coat
After the initial coat, I applied another one, sanded with 400, applied 2 more, sanded with 800, applied 2 more then sanded with 1200.
Getting very shiny!
After the 1200, I applied another 2 coats, then used 0000 steel wool to get rid of the shiny spots.
Here it is with the studs half way installed, and the matte look
Using a hammer and cloth between it and the guitar to push the studs in the rest of the way
More work on the neck, along with an amber stain
Ended up having the front edge rounded off.
Here's the body to give me an idea of what it will look like
Not using the pickups that came with the kit.
The neck has a Railhammer Gnarly 90, and the bridge is from my Hagstrom Viking.
Last edited by Sockpuppet; 24-06-2017 at 07:41 PM.
Great job
Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
Very nice gentle burst on the body...
Builds-
#18 PBG GSH-1R https://www.buildyourownguitar.com.a...ad.php?t=10236
#17 PBG PBA-4 https://www.buildyourownguitar.com.a...ead.php?t=9984
#16 PBG IB-1Q http://www.buildyourownguitar.com.au...ead.php?t=8754
#15 PBG TLA-12 http://www.buildyourownguitar.com.au...ead.php?t=8444
#14 PBG PRS-1H
#11 Scratch build AC15 clone headhttps://www.buildyourownguitar.com.a...ead.php?t=7686
#09 PBG ES-1TL
#07 partscaster Alder Denim Tele.
That is looking really nice
Sent from my SM-G900I using Tapatalk
Looking good.. I like the natural finish and the fade.. looking good..
Posting Permissions
Reply With Quote