first build flying v

[brokin009]

thanks again guys. lovin this build. alot of sanding but loving hpw it is comin up.
i also wanted to double check. once i put a couple of coats of clear on the guitar i sand it down again? is that with a fine sand paper?
thanks guys

[FrankenWashie]

thanks again guys. lovin this build. alot of sanding but loving hpw it is comin up.
i also wanted to double check. once i put a couple of coats of clear on the guitar i sand it down again? is that with a fine sand paper?
thanks guys

Get 3 or 4 coats of clear on, then a light wet sand (only a couple of passes) to knock off the high spots, then you give a couple more coats and repeat until you are happy with the flatness of the clear. The more prep you put into the flat surfaces before stain and clear the better. Unless you have a veneer top, in which case don't sand it! Just let the clear do the work of filling it and flatten it.