Quote Originally Posted by robin View Post
Hey Frankie, for measurements from the nut I just used my trusty 600mm steel rule. Getting the measurement down to 3 decimal places is for mugs. All you can do it get it as close as you can. I measured and checked several times. Whether it will be close enough, well I guess time will tell.
rob
Yeah i guess that is a fair call, my pedantism on that is a work related issue. I play in those tolerances and tighter all the time. Its a hazard when some of your most critical tolerances get measured using the interference of overlapping wavelengths of a monochromatic light source.
I have yet to make some corrections to the test board, so I will see how that goes once I start fretting it. The it will be on to the Ebony board for the SV-1.