TL-1H.....Tele Deluxe

[Chuck]

Hey Kick it's pretty easy to use. Purchase the decal paper from ebay. Print your image or logo onto the paper with an inkjet or laser jet printer. Let it dry for a few hours. Seal the logo/image with a clear coat. Let dry overnight. Cut as close to the image/logo as you can. Submerse it in water for a few minutes then the backing paper will peel off. Place the logo on the guitar. Apply more clear coats for protection

The good thing with the laserjet decal paper is you don't need to do the sealing coat - but you certainly need to with the inkjet one!

[wazkelly]

The good thing with the laserjet decal paper is you don't need to do the sealing coat - but you certainly need to with the inkjet one!

Good advice Chuck.

On my latest Tele I cut the decal slightly bigger than the headstock and trimmed it back after drying so that is was covering the whole headstock face therefore edge line of the transfer was not visible, as is the case on the other 4 builds where I trimmed to the edge of the logo.