Hey Slayer, so this is the LP-1S kit I presume. For a spalted veneer I just give it a light sand with 320 grit paper. The pores/pits and small crevices will be filled with clear coat so don't worry when it doesn't feel flat when you run your fingers over. Remember wear the dusk mask and have a fan blowing the dust away and do it outdoors !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hey Wokka, yep the LP-1S. Thanks for that... whilst my veneer isn't as nice as Zandit's it will still look good!Originally Posted by wokkaboy
Current build (maiden voyage!): PRS - 1TS
Next Build - LP-1S
"Do Not Look Down!!"
Posting Permissions
Reply With Quote