sounds tasty Adam, I've only heard of one of the three types of hops.
sounds tasty Adam, I've only heard of one of the three types of hops.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Moteka is a kiwi one, redcara is a grain, got it down to 15 cents a schoonerOriginally Posted by wokkaboy
Adam, I've completely missed this thread. Love your build so far! So now you have 2x awesome hobbies that can alternate between weather conditions, good stuff 😀
Sent from my SM-T700 using Tapatalk
Current Projects
#Planning 5 String Bass
Hey Adam, I'll just pop over for a quick one shall I? :P
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
No worries gav if i put a beer down on Sunday should be ready to drink in 3 weeks just in time to put the guitar together. Been to hot to make beer since December. You can come and do a taste test or 12 and check out if it sounds any good
Motueka Hops? Choice Bro!
With the number of Home brewers on this site there ought to be a Brewing thread!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Not a bad idea? what about a brewery the naked guitar, you can make a beer and while its cooking put together a pitbull guitar over 6 weeks. You get a guitar and a couple of kegs of beer to take home, plus drink beer while doing the whole thing.
It wouldnt make any money but would be great fun
Sounds like a great idea but not sure much work other than sampling the brew would get done.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
So the rain finally cleared on sat after almost 2 weeks the dt finnally dried and was able to wet sand back the scratches and blisters to do another coat all came up good only a few spots of orange peel in the finish so will wet sand and do one more coat once this last lot of rain clears next week. The dirty fingers pickups turned up along with some crome knobs
looks great Adam, first time I've seen the mock build. Would have like to see the headstock shaped. Are they your toy cars on the table ? haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote