Silent Guitar Scratch build ideas

[FrankenWashie]

Thanks Frankie, appreciate the input!

No problem at all, I like the whole concept you're pursuing with this. I personally would be one to say have a bash at building your own neck. You learn a bucket load from the experience, and you can find tonnes of advice here in the forums. I am currently using my semi failed scratch build neck as a test bed for radiusing fret boards and fretting/inlay work, so it's not like a fail is a total loss. There is always more that you can take out if these attempts.

[Zandit75]

No problem at all, I like the whole concept you're pursuing with this. I personally would be one to say have a bash at building your own neck. You learn a bucket load from the experience, and you can find tonnes of advice here in the forums. I am currently using my semi failed scratch build neck as a test bed for radiusing fret boards and fretting/inlay work, so it's not like a fail is a total loss. There is always more that you can take out if these attempts.

I feel taking the leap to full scratch build including a neck will be the next step, but a lack of tools has me worries for carving a neck etc.
Baby steps at this stage!!

[FrankenWashie]

I feel taking the leap to full scratch build including a neck will be the next step, but a lack of tools has me worries for carving a neck etc.
Baby steps at this stage!!

Spokeshave, Shinto rasp and a couple of round files and half round files are all you need to start with on the carving. The trickiest bit is getting your blanks or laminates square and even thicknesses.