Frankie tell them to round to 1 or 2 decimal points on the drawings. I've been a drafty for about 25 years and seeing 36.4998mm on a drawing would drive me crazy !!
Frankie tell them to round to 1 or 2 decimal points on the drawings. I've been a drafty for about 25 years and seeing 36.4998mm on a drawing would drive me crazy !!
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Ah yes, but I am a mere Sales/Service Representative...How dare I tell engineers how to draw and express something on a General Arrangement! "it has to be to Four decimal places otherwise it does not accurately reflect 1.437"!" and associated rhetoric.Originally Posted by wokkaboy
Thankfully most of our locally produced drawings are done with common sense in mind, else they leave Imperial in Imperial and call it quits at 0.001"+/- mandated tolerances.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Reply With Quote
