Non-PBG RBX Style Bass Guitar Kit RBX-20 from DIY Guitars

[Simon Barden]

Alkay, are you sure you haven't just filled in the hole for the bridge earthing wire? If so, you will need to un-fill it! There should be a hole running from under where the bridge would sit, to either the nearest pickup cavity or the control cavity, so that you can run an earth wire for the bridge. If you look in the cavities, you should be able to find the other end of the hole.

[Alkay]

Alkay, are you sure you haven't just filled in the hole for the bridge earthing wire? If so, you will need to un-fill it! There should be a hole running from under where the bridge would sit, to either the nearest pickup cavity or the control cavity, so that you can run an earth wire for the bridge. If you look in the cavities, you should be able to find the other end of the hole.

My brother did the wood filler on it months ago. From memory it was just a chunk taken out of the body face that was unsightly.

I just ran a guitar string from the cavity into the earth wire hole for the bridge and it doesn't look like it reaches that spot that has been filled with timbermate.

I might scrape it out and check now.